Air compressor is a widely used equipment in industrial production, and it needs to be cleaned regularly to maintain normal operation and maintain the life of the equipment. The core purpose of cleaning the air compressor is to remove dirt and impurities, ensure the normal operation of the machine, and improve efficiency and reliability.

The cleaning method of air compressor mainly includes the following steps:

1. First, turn off the air compressor and unplug all power supplies and wait for it to cool naturally. If necessary, check and confirm that the machine is in a stable state.

2. Remove the air filter and clean it, if the air filter is too dirty, it needs to be replaced. At the same time, check and clean the impurities in the intake pipe to keep the intake pipe unblocked.

3. Disassemble the head of the air compressor and clean the internal air valve, piston, cylinder wall and other parts to maintain good operability and normal working condition. In this process, special attention needs to be paid to the oil filter, especially the air filter, to ensure that the process will not pollute the lubricating oil.



4. Remove the air oil filter and clean it. If the oil filter is too dirty, it needs to be replaced. At the same time, after replacing the oil filter, it is necessary to replace the new lubricating oil to ensure the excellent lubrication oil and lubricator.

5. Check the oil cooler and transmission belt to ensure its quality and working condition. If necessary, it can be cleaned and replaced.

6. Clean and inspect coolers and radiators to ensure smooth internal flow. When the machine runs for a long time, or in a high temperature environment, the cooler and radiator are easy to become dirt and impurities, resulting in poor operation or failure of the machine.

7. Clean the cylinder housing and check whether the bearing is smooth, and replace the bearing if necessary.

8. If necessary, replace motor lubricating oil, clean and check the structure and internal components of the motor.

9. Use high-pressure gas to clean the pipeline as needed to ensure smooth and unblocked pipeline. Instruments, valves and pipes are also inspected and cleaned to ensure their quality and integrity.

10. Finally, reassemble and start the air compressor to ensure its normal operation and good reliability. Before restarting the machine, pay special attention to the necessary tests and inspections to ensure that the machine does not have excessive wear or other damage.

It should be noted that cleaning the air compressor is a rigorous process that requires compliance with operating procedures and attention to safety. The cleaning process may involve hazardous substances and chemicals, so appropriate personal protection measures need to be taken to protect health.

In short, cleaning the air compressor is a necessary and critical maintenance task that can ensure the normal operation of the machine and improve work efficiency. When using and maintaining air compressors, it is necessary to observe the operating procedures and pay attention to safety.

Get more knowledge about What to Look for When Choosing an oil free air compressor Manufacturer please refer to aoguang air compressor: