Oil-free air compressor is an efficient and hygienic compressed air equipment that does not require the use of lubricating oil to reduce friction and wear, so it is suitable for occasions with high requirements for compressed air quality, such as food processing, medical equipment, electronic manufacturing and other fields. The following is the specification and size of the oil-free air compressor in detail.
1. Power: The power of oil-free air compressor is usually expressed in kilowatts (kW). The greater the power, the greater the output pressure and flow of the air compressor.
2. Pressure: Oil-free air compressors can usually provide a pressure range of 7-10 bar, that is, 7 to 10 atmospheres. Different pressure levels of oil-free air compressors are suitable for different work needs.
3. Flow rate: The flow rate of oil-free air compressor refers to the output of compressed air per unit time, usually in cubic meters/minute (m3/min) or cubic feet/minute (CFM). The greater the flow rate, the greater the amount of compressed air that the oil-free air compressor can provide.
4. Noise: The noise level of oil-free air compressors is an important consideration. It is usually expressed in decibels (dB). The noise level of oil-free air compressors should be lower than 85 dB to avoid causing discomfort or health problems to the human body.
5. Appearance size: The appearance size of oil-free air compressor is usually expressed in units of length, width and height, and the common unit is millimeter (mm). The size of the appearance directly affects the installation and use of oil-free air compressors.
6. Weight: The weight of oil-free air compressors is usually expressed in kilograms (kg). The greater the weight, it means that the structure of the oil-free air compressor is more robust, but it will also increase the difficulty of installation and handling.
7. Operating temperature: The operating temperature range of oil-free air compressors is usually between 5-45 degrees Celsius. The use of oil-free air compressors below or above this temperature range may affect their performance and life.
8. Control mode: The control mode of oil-free air compressor can usually be divided into manual control and automatic control. Manual control requires manual intervention to adjust, and automatic control can be automatically adjusted through sensors and controllers, improving the efficiency and stability of air compressors.
9. Power requirements: Oil-free air compressors usually need to be connected to the power supply to operate normally, and their power requirements are usually expressed by voltage (volt) and frequency (Hertz). Different models of oil-free air compressors have different requirements for power supply, and users need to ensure that the purchased equipment matches the actual power supply before purchase.
The above is some detailed expansion of the specifications and dimensions of the oil-free air compressor, and these parameters can be selected according to the specific needs of users and application scenarios. When purchasing oil-free air compressors, users should choose the appropriate specifications and sizes according to their own work needs and the environment to ensure the performance and stable operation of the equipment.