Oil-free air compressor is a special compressed air equipment, which is widely used in various industrial fields. Compared with conventional lubricated air compressors, oil-free air compressors have higher purity and lower maintenance costs. The following is a detailed expansion of the operation process of the oil-free air compressor, hoping to help you.
1. Preparation:
Before operating an oil-free air compressor, you first need to do some preparatory work. Check the appearance of the air compressor to make sure it is not damaged or leaking. Check that the power connection is normal, and ensure that the voltage and frequency match the equipment requirements. In addition, it is also necessary to check the cooling system of the compressor to ensure that the radiator and cooling fan are working properly.
2. Start oil-free air compressor:
Close the exhaust valve of the oil-free air compressor before starting it. Then, turn on the power switch and start the compressor. Wait for some time for the compressor to reach the operating temperature.
3. Monitoring pressure During operation, continuous monitoring is required. Check the outlet pressure of the compressor by using the pressure gauge. If the pressure is too high or too low, appropriate measures should be taken in time to adjust.
4. Control air flow:
Root work requirements, need to adjust the air flow. Control the air flow by adjusting the throttle valve or adjusting the exhaust valve. Ensure stable and accurate air flow.
5. Discharge water regularly:
Because the oil-free air compressor does not use lubricating oil, it is easy to accumulate water. Regular discharge of water is essential to maintain the normal operation of the compressor. Ensure the drying of compressed air by opening the drain valve to discharge water.
6. Regular cleaning and maintenance:
Oil-free air compressors require regular cleaning and maintenance to maintain their performance and longevity. Clean the appearance of the compressor daily, and clean the cooling fan and radiator regularly. Replace filters and seals regularly to ensure proper operation.
7. Regular inspection and maintenance:
Periodically check the key components of the oil-free air compressor, such as the compressor, transmission system and control system. If any fault or abnormality is found, it should be repaired or replaced in time.
8. Turn off the oil-free air compressor:
Before finishing the work or maintenance, it is necessary to correctly shut down the oil-free air compressor. First turn the air flow to a low level and shut down the compressor. Then turn off the power switch and make sure the compressor is completely stopped.
The operation process of the oil-free air compressor requires care and caution to ensure its stable and reliable operation. Through the above operation guide, you can better understand the working principle and operating points of oil-free air compressor, so as to better apply to practical work.