Oil-free air compressor is a common air compression equipment that does not require the use of lubricating oil, so it is more hygienic and energy-saving. However, after a long time of use, some dust and impurities will still accumulate inside the oil-free air compressor, affecting its normal operation and efficiency. Therefore, regular cleaning and maintenance is very important. Below I will introduce the cleaning method of oil-free air compressor in detail.
First of all, before cleaning the oil-free air compressor, it must be ensured that the equipment has stopped running and unplug the power supply. This can prevent accidental injuries.
1. External cleaning: Use a wet cloth or soft brush to clean the shell of the oil-free air compressor. Be careful not to use any corrosive cleaning agent, so as not to damage the surface of the equipment. At the same time, it is necessary to clean up dust and debris around the equipment and maintain air circulation.
2. Filter cleaning: oil-free air compressors are usually equipped with intake filters and oil and gas separators. It is very important to check and clean these filters regularly to ensure their normal operation and filtration effect. First, remove the intake filter and gently brush the surface with a soft brush to remove dust and impurities. If the filter is already heavily contaminated, it can be soaked in cleaner and then rinsed with clean water. Oil and gas separators can also be cleaned in a similar way.
3. Cooling system cleaning: The cooling system of oil-free air compressors usually includes a radiator and cooling fans. Regular inspection and cleaning of these components can prevent overheating and poor heat dissipation. Use a soft brush or blow gun to remove dust and impurities from the radiators and fans. At the same time, it is also necessary to check the water level and quality of the coolant to ensure its normal operation.
4. Clean drainage system: The drainage system of oil-free air compressors usually includes drainage valves and drainage pipes. Regular inspection and cleaning of these components can prevent the blockage of scale and the formation of water. First, close the drain valve and unscrew the drain pipe. Scrub the drain valve and drain line with a soft brush to ensure they are free of obstruction. If scale is found, it can be cleaned with an acidic cleaner.
5. Scroll air compressor cleaning: The core component of oil-free air compressor is the scroll machine, and its cleaning is very important. First, make sure the scroll is stopped and the power is disconnected. Then, use a soft brush or blow gun to remove dust and impurities from the surface of the scroll. If there is oil on the surface of the scroll machine, it can be cleaned with cleaning liquid. However, please note that the cleaning solution cannot come into direct contact with the inside of the scroll machine.
In addition to the above aspects of cleaning, it is also necessary to regularly check the electrical system, wiring terminals and pipeline connections of the oil-free air compressor to ensure its normal and stable operation.
In short, the cleaning methods of oil-free air compressors mainly include external cleaning, filter cleaning, cooling system cleaning, drainage system cleaning and scroll air compressor cleaning. Regular cleaning and maintenance can extend the service life of oil-free air pressure, but also ensure its efficient operation and stable use. I hope the above methods have been helpful.
Get more knowledge about What to Look for When Choosing an oil free air compressor Manufacturer please refer to aoguang air compressor：https://www.oil-freeaircompressor.com