Oil-free air compressor is a kind of equipment widely used in various industrial fields, which has the advantages of high efficiency and energy saving. Correct use of oil-free air compressor to ensure its normal operation, but also to extend its service life. The following are some methods and precautions for the correct use of oil-free air compressors, detailed as follows:
1. Installation location selection:
The oil-free air compressor should be installed in a well-ventilated room or around the equipment to avoid direct sunlight and rain intrusion. At the same time, the ambient temperature should be ensured to avoid overheating or too cold. It is recommended to install the oil-free air compressor on a smooth ground to reduce vibration and noise.
2. Check the power supply voltage:
Before using the oil-free air compressor, be sure to check whether the power supply voltage meets the equipment requirements to prevent the high or low voltage from causing damage to the oil-free air compressor.
3. Clean air compressor:
Regular cleaning of oil-free air compressors is an important means to maintain their normal operation. The cooling system, filtration system, exhaust system, etc. should be cleaned regularly to ensure their normal operation. At the same time, it is also necessary to clean the air compressor shell and keep the machine clean.
64019efd3e81d.jpg
4. Check the motor and transmission parts:
Regularly check the motor and transmission part of the oil-free air compressor to ensure its normal operation. If any abnormality is found, it should be repaired or replaced in time.
5. Ensure stable pressure:
The gas pressure provided by the oil-free air compressor should be kept stable. Check the pressure gauge regularly to ensure that the pressure is within the set range and adjust it as needed.
6. Check the filter element:
The filter element of the oil-free air compressor plays an effective role in filtering impurities in the air, therefore, the condition of the filter element should be checked regularly, and the filter element should be replaced as needed.
7. Focus on lubrication Oil-free air compressors do not need to use oil lubrication, but some models of oil-free air compressors need to fill lubricating oil on some friction parts. Before using the oil-free air compressor, you should read the equipment instructions in detail to ensure that the lubricant is correctly added.
8. Regular maintenance:
Regular maintenance of oil-free air compressor is the key to maintain its normal operation. Maintenance includes cleaning and inspecting various parts of the equipment, replacing worn parts, etc. It is recommended to maintain the equipment according to the requirements of the equipment manual.
9. Avoid overload:
The rated working pressure of the oil-free air compressor is limited, therefore, the use of exceeding its rated working pressure should be avoided. Overloading can cause equipment to overheat, damage or even explode.
10. Pay attention to stability:
When using oil-free air compressors, attention should be paid to stability. To avoid accidents, do not touch the device when it is running. At the same time, personal protective equipment should be worn to ensure stable operation.
In short, the correct use of oil-free air compressors is essential for their normal operation and extended service life. By selecting the appropriate installation position, regularly cleaning, checking all parts of the equipment, maintaining pressure stability, regularly replacing the filter element, paying attention to lubrication, regular maintenance, avoiding overload and paying attention to safety, you can ensure the efficient, reliable and stable operation of the oil-free air compressor.
Get more knowledge about What to Look for When Choosing an oil free air compressor Manufacturer please refer to aoguang air compressor：https://www.oil-freeaircompressor.com